Mô tả sản phẩm

HF-SP202B+MR-J3-200AN

HF-SP202B+MR-J3-200AN 10A 2KW 9.55NM 2000R/MIN WITH BRAKE SERVO MOTOR DRIVE KIT WITH 3M CABLE

MOTOR SPECIFICATIONS:

SERVO MOTOR MODEL	HF-SP 52 (B)	HF-SP 102 (B)	HF-SP 152 (B)	HF-SP 202 (B)	HF-SP 352 (B)	HF-SP 502 (B)	HF-SP 702 (B)
SERVO AMPLIFIER MODEL	MR-J3-60A/B/T	MR-J3-100A/B/T	MR-J3-200A/B/T	MR-J3-200A/B/T	MR-J3-350A/B/T	MR-J3-500A/B/T	MR-J3-700A/B/T
POWER FACILITY CAPACITY	1.0 [KVA]	1.7[KVA]	2.5[KVA]	3.5[KVA]	5.5[KVA]	7.5[KVA]	10[KVA]
RATED OUTPUT	0.5 [KW]	1.0[KW]	1.5[KW]	2.0[KW]	3.5[KW]	5.0[KW]	7.0[KW]
RATED TORQUE	2.39 [NM]	4.77[NM]	7.16[NM]	9.55[NM]	16.7[NM]	23.9[NM]	33.4[NM]
MAXIMUM TORQUE	7.16 [NM]	14.3[NM]	21.5[NM]	28.6[NM]	50.1[NM]	71.6[NM]	100[NM]
RATED ROTATION SPEED	2000 [RPM]	2000 [RPM]	2000 [RPM]	2000 [RPM]	2000 [RPM]	2000 [RPM]	2000 [RPM]
MAXIMUM ROTATION SPEED	3000 [RPM]	3000 [RPM]	3000 [RPM]	3000 [RPM]	3000 [RPM]	3000 [RPM]	3000 [RPM]
PERMISSIBLE INSTANTANEOUS ROTATION SPEED	3450	3450	3450	3450	3450	3450	3450
POWER RATE AT CONTINUOUS RATED TORQUE	9.34 KW/S	19.2 [KW/S]	28.8 [KW/S]	23.8 [KW/S]	37.2 [KW/S]	58.8 [KW/S]	72.5 [KW/S]
RATED CURRENT	2.9A	5.3[A]	8.0[A]	10[A]	16[A]	24[A]	33[A]
MAXIMUM CURRENT	8.7A	15.9[A]	24[A]	30[A]	48[A]	72[A]	99[A]
WEIGHT	4.8KG	6.5[KG]	8.3[KG]	12[KG]	19[KG]	22[KG]	32[KG]

DRIVE SPECIFICATIONS:

MODEL NAME					MR-J3-200AN
POWER SUPPLY		VOLTAGE/FREQUENCY			3-PHASE 200 TO 230VAC, 50/60HZ
		PERMISSIBLE VOLTAGE FLUCTUATION			3-PHASE 170 TO 253VAC
		PERMISSIBLE FREQUENCY FLUCTUATION			WITHIN ±5%
		POWER SUPPLY CAPACITY			REFER TO SECTION 11.2
		INRUSH CURRENT			REFER TO SECTION 11.5
CONTROL CIRCUIT POWER SUPPLY				VOLTAGE, FREQUENCY	1-PHASE 200 TO 230VAC, 50/60HZ
				PERMISSIBLE VOLTAGE FLUCTUATION	1-PHASE 170 TO 253VAC
				PERMISSIBLE FREQUENCY FLUCTUATION	WITHIN ±5%
				INPUT	30W
				INRUSH CURRENT	REFER TO SECTION 11.5
INTERFACE POWER SUPPLY				VOLTAGE	24VDC± 10%
				POWER SUPPLY CAPACITY	(NOTE 1) 300MA OR MORE
CONTROL SYSTEM					SINE-WAVE PWM CONTROL, CURRENT CONTROL SYSTEM
DYNAMIC BRAKE					BUILT-IN
POSITION CONTROL MODE	MAX. INPUT PULSE FREQUENCY				1MPPS (FOR DIFFERENTIAL RECEIVER), 200KPPS (FOR OPEN COLLECTOR)
	COMMAND PULSE MULTIPLYING FACTOR				ELECTRONIC GEAR A:1 TO 1048576 , B:1 TO 1048576, 1/10 A/B 2000
	IN-POSITION RANGE SETTING				0 TO ±10000 PULSE (COMMAND PULSE UNIT)
	ERROR EXCESSIVE				±3 REVOLUTIONS
	TORQUE LIMIT				SET BY PARAMETER SETTING OR EXTERNAL ANALOG INPUT (0 TO 10VDC/MAXIMUM TORQUE)
SPEED CONTROL MODE	SPEED CONTROL RANGE				ANALOG SPEED COMMAND 1: 2000, INTERNAL SPEED COMMAND 1: 5000
	ANALOG SPEED COMMAND INPUT				0 TO ±10VDC / RATED SPEED
	SPEED FLUCTUATION RATIO				±0.01% OR LESS (LOAD FLUCTUATION 0 TO 100%) 0% (POWER FLUCTUATION 10%) ±0.2% OR LESS (AMBIENT TEMPERATURE 25± 10CENTIGRADE DEGREE WHEN USING ANALOG SPEED COMMAND
	TORQUE LIMIT				SET BY PARAMETER SETTING OR EXTERNAL ANALOG INPUT (0 TO 10VDC/MAXIMUM TORQUE)
TORQUE CONTROL MODE			ANALOG TORQUE COMMAND INPUT		0 TO ±8VDC / MAXIMUM TORQUE (INPUT IMPEDANCE 10 TO 12K )
			SPEED LIMIT		SET BY PARAMETER SETTING OR EXTERNAL ANALOG INPUT (0 TO ±10VDC/RATED SPEED)
STRUCTURE					FORCE-COOLING, OPEN (IP00)
WEIGHT(KG)					2.1